控制柜內部雙溫控制器
IInside the control cabinet dual temperature controller
•溫度設定范圍廣 •NO和NC整合在一起 •便于安裝 •高切換性能
•獨立設定溫度
一個溫控器含兩個溫度設定。
常開觸點:常用于監控過濾風扇,熱交換器或當溫度超過設定數值時閉合電路輸出信號。
常閉觸點:常用于連接加熱器,當溫度達到設定數值時斷開線路。加熱器和制冷設備可分別獨立切換,避免傳統切換引起的溫度偏差。
• wide temperature setting range • combined with NO and NC • Easy to install
• High switching performance • A thermostat contains two temperature setting.
Normally open contact: commonly using at the monitor filtering fan, heat exchanger, or output signal from value closed circuit when the temperature is over setting.
Normally closed contact: commonly using at connecting the heater, disconnecting line when the temperature reaches setting. Heater and refrigeration equipment respectively independent switch, avoid the temperature variation caused by traditional switch.
溫控范圍 |
No/Nc:0-60℃ |
|||
切換溫度公差 |
7K(+4K公差) |
|||
感應元件 |
雙金屬感溫材料 |
|||
接觸形式 |
突跳式接觸頭 |
|||
接觸電阻 |
<10mΩ |
|||
使用壽命 Life |
>100,000周期 > 100,000 cycles |
|||
最大切換容量 |
250VAC,10(2)A |
|||
電氣連接 |
4極接線柱,最大夾緊扭矩0.5Nm 鋼性線2.5mm2,多 |
|||
安裝 Installation |
35mm DIN導軌安裝 35mm DIN rail mounting |
|||
外殼 Shell |
UL94 V-O塑料,淺灰 UL94 V-O plastic, light gray |
|||
尺寸 Size |
67x50x46mm |
|||
重量 Weight |
90g |
|||
固定位置 Fixed position |
隨意 Random |
|||
操作/儲存溫度 |
-20℃至+80℃ |
|||
保護等級 |
IP20 |
|||
|
|
|
|
|
訂貨號 order No. |
設定范圍 Setting range |
設定范圍 Setting range |
||
WK002 |
連接斷開器(常閉) |
0℃至+60℃ |
連接斷開器(常開) |
0℃至+60℃ |